Miramar illuminated signs
LED Channel Letter Signs in Miramar
Miramar does not have one commercial identity : it has three running side by side. Corporate headquarters and back-office campuses fill the Miramar Park of Commerce, one of the largest privately owned business parks in South Florida, with aviation, telecom, and logistics companies occupying long, low buildings set back from wide, landscaped roads. A few miles over, Miramar Town Center anchors a walkable retail-and-restaurant core built for foot traffic. And along Miramar Boulevard and the corridors feeding I-75 and the Palmetto Expressway, warehouse and flex-space tenants run operations that need to be found fast by trucks and vendors, not just browsers. An LED channel letter sign has to work differently in each of those settings, and that is exactly the kind of sign Titans of Print builds every week. We are a family-owned shop with 20-plus years in the business, based in Doral and serving Broward as part of our regular territory.
Choose a glowing front-lit face, a halo behind the letters, or both. Titans designs, fabricates and installs illuminated lettering from its Miami/Doral base. Browse real signs below, compare the construction and face options, then send your logo and property details for a quote.
Get a Quote for Your Miramar Sign
Send your logo, approximate sign size, property address and target date. Include a photo of the full storefront or building front and any written property sign criteria so we can quote the lettering and mounting together.
Channel Letter Sign Gallery
See real channel-letter signs, including storefronts, building names, logos and raceway installations. If you like an example, tell us whether it is the lighting, color, letter style or mounting that you want for your sign.
Channel-letter planning around Miramar
Miramar Town Center combines civic, retail, office, and residential uses, so an address alone does not show where customers should look. Identify building, tenant entrance, parking arrival, and directory position. Use the facade sign to confirm the business, with directions at earlier decision points.
For a Miramar Parkway storefront, share a straight-on building image and a second photo from the driveway or sidewalk approach. The visible width changes at an angle, especially where landscaping interrupts the view. Include measured sign area so the proof fits the building proportions.
The VSE Aviation case documents an 84-inch routed-aluminum logo wall in a Miramar conference room, using snap-stud mounting. That is an interior application, not an exterior channel-letter installation. It can inform brand coordination; your facade needs its own lighting, attachment, and property review.
At a mixed-use property, establish whether the tenant, an association, or the landlord controls the facade and electrical access. Send written sign criteria and any existing power location. A qualified electrician handles electrical work; clarify responsibilities before installation planning.
Coordinate this sign with Miramar exterior building signs, Miramar illuminated signs and Miramar office lobby signs. Share separate dimensions and photos for each location.
Front-Lit, Halo-Lit or Both?
These three lighting styles use different face and back materials. The diagram shows the construction and the effect each one creates. Choose the look you want, then check it against your wall color, available space and landlord’s sign requirements.
Front-lit channel letters
LEDs inside the letter shine through a translucent acrylic face. The face is the bright part you see at night, while the metal sides give the letter its depth. This is a familiar choice for shops, restaurants and showrooms where a name needs to stand out from the road or parking lot.
White acrylic, colored acrylic and translucent vinyl treatments give you different ways to carry your brand colors. Some front-lit letters have a trim cap around the face; the finish and face treatment are part of the approved design.
Reverse-lit or halo-lit letters
These have an opaque face and LEDs that shine toward the wall. Spacing behind the letters lets the light form a halo around the outline. Painted or metal faces remain visible during the day, with a softer glow after dark.
The wall is part of the effect. A smooth, light wall reflects the glow differently from dark brick or textured cladding. The stand-off distance and letter spacing need to work with that surface.
Front and back lit letters
A translucent face and a clear back let the sign light forward and create a halo behind it. You can also combine different lighting treatments within a logo, such as a glowing name with a backlit symbol.
This gives you more control over the nighttime look, but adds lighting and wiring decisions. We show which parts illuminate on the drawing so you can approve the effect before fabrication.
Illuminated office logos
Indoors, a lit logo is usually seen much closer. Letter depth, brightness and the cable route matter beside a reception desk or decorative wall. The same brand can use a smaller interior sign without copying the exterior installation.
For other indoor treatments, compare office lobby signs, edge-lit acrylic signs and custom acrylic signs. LED neon creates a different line of light and is a separate product.
For more lighting examples, see backlit channel letters or our guide to front-lit versus halo-lit signs.
What Color Will the Face Be, Day and Night?
The face is the front surface of a channel letter. It controls the daytime color and how light passes through the sign after dark. The illustrated options below show why the face material deserves its own decision, even when the letter shape stays the same.
Daytime: lights off
Nighttime: LEDs on
White acrylic with colored vinyl
A white translucent acrylic face can carry applied colored vinyl. This gives you a colored face while letting light through it. The original material example shows 3M colored vinyl; the selected film and acrylic should suit an illuminated sign.
Colored acrylic
The color is in the acrylic itself. It can be a good fit when an available acrylic color suits the logo. Check the color both unlit and illuminated, because the glow may look different from a printed brand reference.
Plain white acrylic
A white face gives a clean, bright illuminated letter. It is useful for simple wordmarks and for signs where white lettering provides strong contrast against the building.
Black and white day/night faces
A day/night face is designed to look dark during the day and light up white at night. It gives you an alternative when a black daytime wordmark would otherwise lose its readable face after dark. Ask to see the lit effect alongside the daytime finish.
Printed vinyl on white acrylic
Printed translucent vinyl allows graphics or multiple colors on the face. The original example includes 3M printed vinyl. The print, film and acrylic work together, so we review the illuminated color as well as the daytime artwork.
Bring your brand colors or Pantone references. We help select the closest suitable face and return finishes, with samples or proofs to approve how the sign will look in both conditions.
How Your Channel Letters Are Built
Each letter is a separate three-dimensional body. Aluminum backs and sides, called returns, form the structure. A typical front-lit letter has an acrylic face, LED modules inside and wiring connected to a power supply. With direct mounting, the wall shows through between the letters.
Common construction uses aluminum returns around .040 to .063 inch thick and letter bodies about 3 to 5 inches deep. Depth, face material and the back arrangement can change for a halo-lit or specialty sign. We confirm those details on the drawing for your job.
The LEDs sit inside the letter body, while the face and return finishes carry the brand’s appearance. A clear back can let light reach the wall for a halo effect. Outdoor construction also needs appropriate wiring pass-throughs, sealing and drainage, as shown in the lighting diagram.
From artwork to finished sign
- Approve the design: confirm the wording, logo, size, lighting, colors and mounting position.
- Make the letter bodies: cut the backs and form the returns to the approved shapes.
- Prepare the faces: cut the acrylic or metal and apply the selected face treatment.
- Fit and check the lighting: position the LED modules, route the wiring and test the illuminated effect.
- Prepare for installation: match the letters, mounting hardware and layout template to the agreed installation.
Keep the final drawing and component information with your building records. They make future service and replacement work easier to match to the original sign.
Choose Letter Size for the Distance People Will See It
A sign read from a sidewalk needs a different scale from one seen across a parking lot or from a busy road. Start with the distance between your sign and the people you want to reach. Then check the available sign area and the size the property allows.
Our chart uses about 10 feet of viewing distance for each inch of letter height as a starting point for impact. That puts a 12-inch letter at about 120 feet and a 24-inch letter at about 240 feet. Those are planning examples, not guarantees: thin strokes, decorative lettering, poor contrast and an angled view can make the same letters harder to read.
Send a wide photo from the actual approach. We can review letter height, spacing and logo proportions together. Read more in our channel-letter size guide.
| Letter height | Distance for impact | Maximum readable distance |
|---|---|---|
| 3 inches | About 30 feet | 100 feet |
| 6 inches | About 60 feet | 200 feet |
| 9 inches | About 90 feet | 400 feet |
| 12 inches | About 120 feet | 525 feet |
| 15 inches | About 150 feet | 630 feet |
| 18 inches | About 180 feet | 750 feet |
| 24 inches | About 240 feet | 1,000 feet |
| 30 inches | About 300 feet | 1,250 feet |
| 36 inches | About 360 feet | 1,500 feet |
The chart’s longer maximum distances assume favorable conditions and simple uppercase lettering. For a moving driver, quick recognition matters more than being able to work out the name from the farthest possible point. The International Sign Association’s placement guidance also explains how traffic, letter style and viewing conditions change the size needed.
Direct Mounting, a Raceway or Stand-Offs?
Letters mounted directly to the wall
Individual letters attach to the building, with the wiring route planned behind them. This lets the wall remain visible between the letters and keeps a separate mounting enclosure out of the finished view. The wall material and access behind it affect the installation.
Letters mounted on a raceway
A raceway is an enclosure behind the letters that carries wiring and can house the power supply. It lets the sign mount as an assembly through a planned set of fixing points. Some landlords prefer or require it, especially where they want a consistent sign system for tenants.
The raceway can be finished to suit the wall, but it remains a visible part of the sign. Check the landlord’s criteria before choosing direct mounting or a raceway; one method is not required at every property.
Stand-offs for halo lighting
Reverse-lit letters need a gap behind them so the LEDs can shine onto the wall. Studs and stand-offs set that spacing while securing the letters. The right distance depends on the desired glow, the wall and the approved mounting details.
What the raceway diagram shows
The main building-power connection feeds the power supply. Secondary wires run to the LEDs through planned pass-throughs. Mounting holes and the hanger bar support the assembly, while drainage holes help water leave the enclosure.
The pictured 6-inch by 5-inch enclosure and 2-inch hanger bar are example dimensions. Your installation drawing specifies the raceway size, fixing method and electrical arrangement for your sign.
For a replacement sign, include photos of the old fixing and wiring points and tell us whether removal or wall restoration is needed. Our channel-letter installation guide explains the details to gather.
Why Some LED Signs Are Hard to Install
A clean-looking sign still needs a practical wiring route. Separate letters may need several connection paths; a solid wall, a finished ceiling or another occupied room behind the sign can limit where those wires go. A suitable backer or raceway can help organize the connections, but its power feed and future service access still need a plan.
Thin logo strokes also leave less space for LEDs and wiring. The dimensions in the graphic illustrate one construction; the actual module, letter depth and usable cavity determine what fits. Send photos of both sides of the wall, any ceiling access and the known power location with your artwork.
Read the full guide to LED sign wiring, wall access and installation requirements for the options to review before fabrication.
What Makes a Channel Letter Sign Different From a Panel Sign
A channel letter is its own sealed, three-dimensional unit rather than a graphic printed on a flat panel. The body : the return : is formed from aluminum, usually .040 to .063 gauge and 3 to 5 inches deep, and it holds a face cut from acrylic in your exact brand color. A trim cap seals the seam between face and return. Inside, a run of low-voltage LED modules ties back to a UL-listed power supply. Everything here is solid-state LED; there is no gas-filled tubing in a modern build, and none of it belongs on a serious commercial building anyway. Because each letter is its own shell, the wall shows through between characters and the sign reads as part of the building rather than something bolted on top of it : which is precisely the look that reads as established in the Park of Commerce and as sharp and current in Town Center. For the full construction picture, see our page on channel letter signs.
Front-Lit, Halo-Lit, or Both
Front-lit letters use a translucent acrylic face that glows evenly across the whole letter : the classic bright storefront look that carries across a Town Center plaza or a retail strip on Miramar Parkway. Halo-lit (reverse-lit) letters flip that: the face is opaque, and the light pushes backward, wrapping the letter in a soft ring of glow against the wall. That quieter, premium effect is what most corporate tenants in the Park of Commerce ask for on their building identification. Some businesses run both in the same sign for maximum presence day and night. If you are deciding between them, our guide on the difference between front-lit and backlit channel letters breaks down where each wins, and our backlit channel letter signs page shows the halo effect in our own completed work.
Engineering for Broward’s HVHZ, Not Just Wind in General
Miramar sits inside Broward County, which : like all of Miami-Dade : falls within the High-Velocity Hurricane Zone. That is a specific, stricter code tier than standard Florida wind requirements, and it applies to every outdoor electrified sign in the city, from a single-letter logo on a Park of Commerce headquarters building to a full storefront set in Town Center. An HVHZ package means signed and sealed structural engineering, correct attachment methods for the actual substrate (tilt-wall concrete, EIFS, stucco-over-block, metal panel : Miramar has all of them), and a design that will still be attached to the building after the storm that everyone remembers passes through.Confirm the requirements for the actual property and allow time for review comments.
Outdoor structural design and permit requirements must be checked for the sign and actual address. That means a plan review, an issued permit, and a field inspection once the sign is up. We manage that process directly rather than handing it to a third party, which matters most on corporate campus buildings where the sign package often has to match a broader tenant-improvement or lobby build-out already moving through the same permit office.
Mounting Across Corporate Campuses, Town Center Storefronts, and Flex-Warehouse Bays
The Park of Commerce’s low-rise, deep-setback office and industrial buildings usually call for flush-mounted letters wired behind a discreet raceway, since these buildings tend to be single-tenant or campus-style with one clean facade to work with rather than a shared storefront band. In Town Center and along the retail corridors on Miramar Parkway and Pembroke Road, multi-tenant strip centers are the norm, and landlords there almost always specify a raceway mount : a slim aluminum enclosure that carries the letters and conceals the power supplies and wiring behind one controlled set of penetrations, which keeps the facade easy to restore between tenants. In the flex-warehouse zones near the I-75 and Palmetto Expressway interchanges, buildings are often tilt-wall concrete with limited existing conduit, so we plan the raceway and power run as part of the engineering rather than as an afterthought. Halo-lit letters, wherever they land, typically go up on studs or stand-offs that hold them a fixed distance off the wall to create the glow gap. Full mounting logic : including how these methods interact with wind load : is covered in our page on channel letter installation requirements.
Sizing for the Way People Actually See Your Sign in Miramar
Miramar is a driving city more than a walking one, at least outside Town Center. A headquarters sign on a Park of Commerce building is usually read from a landscaped entrance road at a slow roll, not a highway pass, so proportion and letter spacing matter more than raw scale. A retail sign on Miramar Parkway or Red Road, by contrast, needs to compete with a strip of neighboring tenant signs and be legible at speed. We size letters against the actual viewing distance and travel speed of your specific corridor rather than a generic formula : details we walk through in our page on the right size for channel letters and building signage. On the color side, we match acrylic faces and painted returns to your exact brand specification, Pantone references included, so the lit sign over your Miramar entrance matches your logo everywhere else : website, vehicle wraps, business cards.
LED service life depends on the specified components, operating conditions and maintenance. They run cool and pull a fraction of the power older illuminated signage needed, which keeps the sealed aluminum housings from baking under a Broward summer sun and keeps your electric bill in check.
Matching the Sign to Miramar’s Mixed Economy
Miramar’s business base is genuinely varied, and the right sign for one tenant is wrong for the next. Corporate and back-office occupants in the Park of Commerce : aviation services, telecom operations, logistics headquarters : tend toward halo-lit letters in a brushed or painted metal finish, a look that reads as permanent and established from a landscaped campus entrance rather than shouting for attention. Family and community-serving retail in Town Center and along the city’s commercial corridors, including the many Caribbean-American-owned restaurants, markets, and service businesses that give Miramar its character, generally do better with bright front-lit letters that hold their own against a busy retail lineup and pull in walk-up and drive-by traffic alike. Warehouse, distribution, and flex-space tenants near the I-75 corridor need large, high-legibility front-lit letters that a truck driver or delivery service can spot from an access road, often paired with clear directional and dock signage.
Plenty of Miramar businesses also want the illuminated look inside the building. Corporate lobbies across the Park of Commerce frequently use lit dimensional letters as the reception-wall centerpiece, which pairs naturally with our office lobby signs and non-illuminated metal logo signs for a coordinated look from the parking lot to the front desk. Where a slimmer interior profile makes more sense, edge-lit LED signs and custom acrylic signs carry the same lit-brand concept at a smaller scale, and our full illuminated business signs lineup covers everything in between.
Property Approval, Permits and Installation
Confirm the current landlord or property sign criteria before approving the design. They may cover the location, overall size, colors, lighting or mounting method. The applicable permit and engineering requirements depend on the actual address and project.
Titans handles or significantly assists with permitting where required and coordinates survey and engineering needs. Send the written property criteria and the site address so the approval path can be checked. A finished photo is not a substitute for a reviewed mounting plan.
Our business-sign permit guide explains the questions to ask before production. For the local rules, see the Miramar sign permit guide.
Allow time for approvals and site work
Permits add approximately 4 to 8 weeks where required, separate from roughly 3 to 4 weeks or longer for production. Landlord review, engineering, comments and access scheduling can also affect the installation date. Share your opening date early.
A qualified electrician performs electrical work. We coordinate the signage requirements and installation handoff so power location, switching, connection and responsibilities are agreed. Photographs should show the building height, canopy, landscaping, access-equipment space and occupied entrances.
Watch Channel Letters Being Made
See how channel letters take shape in the shop. The fabrication video shows the product behind the finished sign, with a real sign preview before you press play.
When sharing a reference, say what you like about it: the face color, letter depth, lighting effect, mounting or overall proportions. That is more useful than asking for a sign “just like the photo” on a wall with different conditions.
How Much Do Channel Letter Signs Cost?
$2,000 to $5,000 is a useful starting budget for many storefront channel-letter signs. It is not a fixed price: the size and number of letters make a big difference. A longer name needs more letters, and taller letters need more material and lighting. Larger building signs can go above that range.
For a rough letter estimate, you can use $20 to $30 per inch of letter height, per letter. Add the letter heights together, then multiply by that range. Logos, unusual shapes and specialty lighting need their own estimate.
A simple budgeting example
Ten letters, each 12 inches tall, total 120 inches of letter height. At $20 to $30 per inch, that gives an estimated $2,400 to $3,600 for the letter calculation.
The same ten letters at 18 inches total 180 inches, giving $3,600 to $5,400. That is why increasing the height can move a sign beyond an initial $2,000 to $5,000 budget.
These examples help you compare sizes. They are not a complete installed quote. Confirm the logo, lighting, mounting, installation, electrical work, permits and engineering scope before relying on a total.
What else affects the price?
- The length of the business name and the complexity of its logo.
- Front-lit, halo-lit or combined lighting.
- Acrylic face treatments, metal finishes and letter depth.
- Direct mounting, a raceway or a separate backing panel.
- Sign-removal work, wall repairs and access equipment.
- Electrical connection, engineering and permitting needs.
- Quantity, delivery and installation locations.
Production and permit timing
Allow roughly 3 to 4 weeks or longer for production, depending on the approved design, materials and quantity. Permits add another 4 to 8 weeks. We confirm the sequence and installation date for your job so the production estimate is not mistaken for the whole project schedule.
Titans serves Miami-Dade, Broward and Palm Beach and ships signs nationwide. Installation outside South Florida is quoted for the project, with travel or installer coordination as needed.
What to Send for Your Quote
Logo, dimensions and colors
Send the largest available logo file, preferably vector artwork, plus brand colors and approved wording. Include the width and height of the available sign area and a straight-on wall photograph. Tell us the intended viewing distance and whether the sign faces a sidewalk, parking area or road.
Do not use a phone screenshot as the only production reference if a vector master exists. Fine artwork details, outlines and spacing need to remain clear when the sign is fabricated. If the logo needs adaptation, approve that change before production.
The lighting brief
State whether you want a glowing face, a halo, or both. Describe the intended light color and which logo elements should illuminate. Include the wall finish and any existing nighttime lighting near the sign so the proof can be discussed in context.
Address and installation details
Include the exact address, mounting surface, sign height, quantity, target opening date and known property restrictions. Identify who approves the artwork, who provides landlord approval, and who handles the electrical connection.
For a multi-location order, list the measurements and conditions separately for each address. Consistent brand artwork does not make every installation identical. The production specification and logistics should reflect the actual locations.
Review before fabrication
Check spelling, proportions, face and return colors, lighting treatment, dimensions and mounting on the proof. Confirm the current logo version and final approver. Keeping those decisions in one approved drawing reduces ambiguity when the fabrication and installation teams work from it.
Looking After Your Finished Sign
LED channel letters give you an illuminated sign without the glass tubing used in traditional neon. The modules and power supply are selected for the build, and their service needs depend on the components, operating hours and location.
At handover, check the sign in daylight and after dark from the agreed viewing position. Keep the approved drawing, finish references and component information so future maintenance or replacement letters can match the original.
Follow the cleaning advice for the acrylic, vinyl and metal finishes on your sign. Ask about maintenance access and the warranty terms for your build when reviewing the quote.
If a letter or section stops lighting, send photos showing what is affected. The sign-service team and the appropriate qualified trade can review the lighting, connection and access needed for the repair.
Channel Letter Questions
How much do channel letters cost?
Many storefront signs start around $2,000 to $5,000, depending on size and letter count. A rough letter estimate is $20 to $30 per inch of letter height, per letter. Logos, lighting, mounting, installation, electrical work, permits and engineering need to be confirmed in the actual quote.
How long do production and permits take?
Allow roughly 3 to 4 weeks or longer for production, depending on the approved design, materials and quantity. Permits add approximately 4 to 8 weeks where required. Property approval, review comments, engineering and site access can affect the final installation date.
What affects the price of channel letters in Miramar?
Many storefront signs start around $2,000 to $5,000, but that is not a fixed price. A rough estimate uses $20 to $30 per inch of letter height, per letter. Longer names, taller letters, lighting choice, mounting, access, electrical work, permits, and installation affect the final quote. A final quote follows review of the actual facade, approved drawing, and site scope.
How long will a Miramar channel-letter project take?
Allow about 3 to 4 weeks or longer for production after approval. Permits, when required, can add 4 to 8 weeks, and landlord review, engineering, access, and electrical coordination can affect the date. Send the address and opening target so the project sequence can be reviewed. The property review schedule is confirmed separately for each address and project.
Can Titans install channel letters at my Miramar address?
Titans handles local installation across South Florida, with scope confirmed for the project address. Outside the local area, shipping is available nationwide and installation is quoted individually. Send the facade, location, access details, and property criteria. A qualified electrician performs electrical work. The quote states whether delivery, travel, or installer coordination is included. for this specific project and destination.
Do I need a permit for an LED channel letter sign in Miramar?
The sign and mounting need to be reviewed for the actual address, building and current property criteria. Outdoor wind-load, structural and permit requirements must be included where applicable. Send the property guidelines and building photos before production; a finished-sign photo does not establish approval for another location.
Does an LED sign in Miramar need to meet HVHZ wind standards?
The sign and mounting need to be reviewed for the actual address, building and current property criteria. Outdoor wind-load, structural and permit requirements must be included where applicable. Send the property guidelines and building photos before production; a finished-sign photo does not establish approval for another location.
What's the difference between front-lit and halo-lit channel letters?
Front-lit letters have a glowing acrylic face for maximum brightness, which works well for retail storefronts that need to stand out. Halo-lit (reverse-lit) letters use an opaque face that casts a soft glow onto the wall behind them, a look many corporate offices in the Park of Commerce prefer.
Can channel letters be installed inside a Miramar office or lobby?
Yes. Illuminated lettering can identify a business inside an office, reception area or showroom. Give the interior location its own dimensions, wall photos, power details and viewing distance. Interior attachment, electrical and property requirements still need review; an indoor location is not an automatic exemption from approval requirements.
My building in Miramar is multi-tenant. How does mounting work?
Individual wall mounting, a raceway or a backer panel can each suit different buildings. The property criteria, actual wall construction, wiring path, working height and service access determine the choice. Share a full-frontage photo and measurements so the drawing and quote can show the visible support and site work.
Get a Quote for Your Channel Letter Sign
Ready to compare options for your building? Send your artwork, measurements, address and target date below. Include photos and any landlord requirements so we can quote the right sign and installation.
More Channel Letter and Building Sign Information
Latest from Titans of Print
Sign ideas, shop updates and useful tips. Follow @titansofprint on Instagram.
What customers say
