Exterior Building Signage in Miramar

Fly into Fort Lauderdale-Hollywood International and look south along the Interstate 75 corridor and you will see it before you land: mile after mile of low, wide corporate and industrial rooftops carrying building-mounted logos that have to be legible from an approach road, not just a parking lot. That is the Miramar Park of Commerce, one of the largest business and industrial parks in South Florida, home to aviation contractors, telecom operators, and logistics headquarters that need their exterior signage to read as established corporate identity rather than storefront branding. A few miles east, Miramar Town Center runs on a completely different logic — walkable blocks of retail and restaurants, many of them Caribbean-American-owned family businesses, where a sign has to work at 15 miles an hour and on foot. Titans of Print is a family-owned sign shop based in Doral, and after 20-plus years building exterior signage across Broward and Miami-Dade, we have learned that a Park of Commerce headquarters sign and a Town Center storefront sign are almost never the same job, even though both fall under the same permit code.

Two Cities in One: Corporate Campus vs. Neighborhood Retail

Miramar’s commercial geography splits cleanly into a handful of distinct environments, and each one drives a different exterior sign decision. The Park of Commerce, stretching along Miramar Parkway and SW 145th Avenue, is built for single-tenant and campus-style occupants — long low-rise buildings set back from landscaped entrance roads, with parking fields and monument entries doing a lot of the identification work before a visitor ever reaches the door. Town Center, closer to Red Road and Miramar Parkway’s eastern stretch, is dense, walkable, and multi-tenant, where a storefront sign competes with a dozen neighbors in the same sightline. Further out toward US-27 and the warehouse belt near I-75, flex and distribution buildings need signage a truck driver can spot from an access ramp, not a design that photographs well up close. We ask which of these your building sits in before we ever sketch a layout, because the answer changes the letter height, the mounting method, and often the product category entirely.

Building-Mounted Corporate Logos for the Park of Commerce

Corporate tenants in the Park of Commerce are usually identifying a headquarters or regional office to employees, visitors, and passing traffic on a wide arterial road, not chasing impulse walk-ins. That calls for a different register than retail branding. A dimensional building-mounted logo — often non-illuminated during the day and halo-lit at night — reads as permanent and deliberate on a tilt-wall concrete or metal-panel facade. Metal logo signs in brushed or painted aluminum carry the substantial, engineered look that an aviation contractor or logistics operator’s headquarters building wants, while brushed aluminum signs pair cleanly with the glass-and-metal-panel facades common in the newer sections of the park. Where a company wants full nighttime presence without going with traditional channel letters, halo-lit dimensional logos throw a quiet ring of light against the wall, a look that photographs well on a corporate campus without competing with a retail strip’s brighter, punchier lettering. For tenants who want the option of illuminated letters on the same building, our illuminated business signs page covers the front-lit and halo-lit range side by side.

Monument Signs and Entry Identity for a Business Park Built on Setbacks

Because so much of the Park of Commerce is built on deep setbacks from the road, a wall sign alone often cannot do the job — by the time a driver on Miramar Parkway or SW 145th Avenue can read a logo mounted three stories up, they have already passed the driveway. That is where monument signage becomes the primary identifier rather than a supporting piece. A well-built entry monument brings the company name and often a tenant directory down to eye level at the property line, giving visitors, couriers, and new hires a clear landmark to turn at. For campuses with multiple buildings or suites, a monument doing double duty as a directory sign reduces the number of confused delivery trucks circling the lot looking for the right dock. These are engineered structures with real foundations, sized and reviewed the same way a building sign is, and they need to hold up to the same wind loads as anything mounted on the structure itself.

Broward’s HVHZ Code Applies to the Sign, Not Just the Building

Miramar sits inside Broward County, and Broward — along with Miami-Dade — is part of Florida’s High-Velocity Hurricane Zone, the strictest wind-load standard in the country. That code does not stop at the building envelope; it governs the sign, the mounting hardware, and every fastener holding a logo, monument, or letter set in place. A building-mounted sign on a Park of Commerce facility, especially one large enough to read from a distance, needs signed and sealed engineering showing it will stay attached through a major storm, and the City of Miramar will not issue a permit without that engineering behind the application. Monument signs need their own structural review for footing depth and wind exposure at ground level, since they stand fully exposed with nothing to break the wind the way a building does. We handle the engineering, the drawings, and the permit submission ourselves rather than routing it through a third party, which matters most on campus projects where the sign package often needs to move through the permit office alongside a larger tenant build-out.

Wayfinding for a Park Built at Corporate Scale

A single logo on the front of a building is only part of the signage a business park this size actually needs. Multi-building campuses, larger warehouse and flex sites, and properties with separate visitor, employee, and loading-dock entrances depend on directional and wayfinding signage to move traffic to the right door without guesswork. We design that wayfinding as a coordinated family with the main identification sign — same materials, same color logic, same mounting standards — so a property reads as one intentional identity instead of a patchwork of add-on signs installed over the years by different vendors. This matters as much for a logistics operator routing trucks to a specific dock door as it does for a corporate campus directing visitors to a shared lobby entrance.

Warehouse and Flex-Space Identification Near the I-75 Corridor

The distribution and flex-space buildings clustered near the I-75 interchanges and along US-27 have their own signage logic entirely. These tenants are usually identified from an access road at speed by a truck driver or a delivery service, not admired up close, so legibility at distance matters more than architectural subtlety. Large, high-contrast building letters or a fabricated logo sign mounted on tilt-wall concrete, paired with clear suite or dock numbering, does more for a warehouse tenant than an elegant halo-lit treatment sized for foot traffic. Where a flex building houses several small tenants under one roof, a shared monument or directory sign at the entrance keeps everyone identifiable without cluttering the building face with competing panels.

Town Center and Family Retail: Reading at Walking Speed

Miramar Town Center runs on the opposite logic from the Park of Commerce. It is a walkable, multi-tenant retail environment, and a large share of the businesses there — restaurants, markets, personal-care shops, and other family-run storefronts serving Miramar’s large Caribbean-American community — depend on a sign that reads clearly to someone walking past a storefront window, not driving by at 45 miles an hour. Cabinet signs with an illuminated printed or routed face remain a practical, economical choice for multi-tenant strips here, since a landlord can reface one tenant’s cabinet without touching the building’s overall look when a lease turns over. For a business that wants a more distinctive presence than a standard cabinet, routed PVC letters and logos deliver real dimension and a custom shape at a friendlier price point than an all-metal build, while custom acrylic signs add color depth and a layered look for a storefront that wants to stand out on a crowded block.

Materials That Hold Up to South Florida’s Climate

Every exterior sign in Miramar deals with the same climate math regardless of which part of the city it sits in: relentless UV exposure, high heat, driving summer rain, and salt-tinged air carried inland from the coast. Aluminum returns and cabinets, UV-stable acrylic faces, and properly sealed fasteners are what keep a sign’s finish sharp after several South Florida summers instead of chalking or fading within a year or two. This is a bigger factor on Park of Commerce buildings, where a sign is often mounted 20 to 40 feet up and genuinely difficult to service, than on a Town Center storefront a technician can reach from a ladder. Specifying the right substrate and finish up front, rather than the cheapest option that looks fine on install day, is what keeps a corporate logo from needing an early refinish.

What Exterior Signage Costs in Miramar

Pricing swings widely with sign type, size, illumination, and how much engineering the project requires. A small routed logo or a single-tenant cabinet refacing sits at the low end, while a typical installed exterior sign package for a storefront or small office building generally falls in the $2,000 to $5,000 range. Large building-mounted corporate logos, monument signs with directory panels, and coordinated wayfinding packages for multi-building campuses run well above that, since they carry more engineering, larger footings, and more fabrication. The honest answer for any specific Miramar property is a site review of the building, the setback, and what the City of Miramar and Broward County will require for that particular sign.

One Shop, Design Through Installation

Titans of Print designs, engineers, permits, fabricates, and installs every exterior sign in-house, which means the team drawing your building logo is the same team stamping the wind-load calculations and the same crew on the lift the day it goes up. That matters on a Park of Commerce project where the sign package often has to align with a broader construction or tenant-improvement timeline, and it matters just as much for a Town Center restaurant that needs a straightforward cabinet reface done right the first time. We are based in Doral and serve Miami-Dade, Broward, and Palm Beach directly, and we ship UL-listed signage nationwide with installer coordination for Miramar-based companies opening locations in other markets. Businesses weighing interior identification alongside their building sign often pair this work with our office lobby signs for a consistent look from the parking lot to the reception desk.

Frequently Asked Questions

Do I need a permit for exterior building signage in Miramar?

Yes. Exterior signs in Miramar are permitted through the City of Miramar, with Broward County involved on the structural and code side, and the application generally requires engineered drawings. Titans of Print prepares and submits the full permit package as part of the project.

Does Broward County require HVHZ engineering for signs?

Yes. Broward County falls within Florida’s High-Velocity Hurricane Zone, so any building-mounted sign, monument, or wayfinding structure needs signed and sealed engineering proving it will withstand hurricane-force wind loads. This applies to a small storefront cabinet and a large corporate logo alike.

What’s the difference between a building-mounted logo and a monument sign?

A building-mounted logo attaches to the structure itself and works well when the building sits close to the road. A monument sign stands at ground level near the property line and is the better choice for deep-setback sites like much of the Miramar Park of Commerce, where a wall sign would be too far from the street to read.

How much does exterior signage cost for a Miramar business?

Cost depends heavily on sign type, size, illumination, and engineering scope. A typical storefront or small office sign package generally runs $2,000 to $5,000 installed, while large corporate logos, monuments, and multi-sign wayfinding packages for bigger campuses run higher.

Can you mount signage on a multi-building corporate campus?

Yes. Multi-building sites in the Park of Commerce and similar campuses typically need a primary building or monument identifier plus a coordinated wayfinding package directing visitors, employees, and delivery vehicles to the correct entrance or dock. We design these as one family rather than a set of unrelated signs.

What materials hold up best on Miramar’s exterior signs?

Aluminum, UV-stable acrylic, and properly sealed fasteners are the standard, since they resist South Florida’s sun, heat, and salt air far better than budget substrates. This matters even more on tall corporate building signs that are difficult to reach for early maintenance.

How long does permitting and installation take in Miramar?

Timelines vary with sign complexity and how quickly the City of Miramar and Broward County process plan review, but engineered exterior signage generally needs several weeks for design, engineering, and permitting before fabrication and installation begin. Projects tied to a larger construction timeline should start the sign process as early as possible.

Exterior building signage in nearby areas: Pembroke Pines, Hollywood, Weston, Davie, and across South Florida.