Pembroke Park illuminated signs
LED Channel Letter Signs in Pembroke Park
Pembroke Park is a working town. Run the length of Hallandale Beach Boulevard or cut across SW 40th Street toward Pembroke Road and I-95, and what you pass is warehouses, distribution yards, wholesale showrooms, auto and truck shops, and the sprawling Hollywood/Pembroke flea market pulling weekend crowds off the interstate. This is not a resort strip or a boutique retail district : it is Broward County's back-of-house, and the businesses here tend to be B2B, wholesale, or service operations that need their building identified clearly, permanently, and without a lot of upkeep. LED channel letters, individually lit dimensional letters fabricated as sealed units, are the sign that does that job. Titans of Print is a family-owned shop with 20-plus years in the trade, based in Doral and working Broward daily, and we build these signs start to finish under one roof.
Choose a glowing front-lit face, a halo behind the letters, or both. Titans designs, fabricates and installs illuminated lettering from its Miami/Doral base. Browse real signs below, compare the construction and face options, then send your logo and property details for a quote.
Get a Quote for Your Pembroke Park Sign
Send your logo, approximate sign size, property address and target date. Include a photo of the full storefront or building front and any written property sign criteria so we can quote the lettering and mounting together.
Channel Letter Sign Gallery
See real channel-letter signs, including storefronts, building names, logos and raceway installations. If you like an example, tell us whether it is the lighting, color, letter style or mounting that you want for your sign.
Channel-letter planning around Pembroke Park
Pembroke Park is compact within a larger pattern of commercial corridors, so the exact address matters more than a broad city label. Send street number, tenant name, and a photo showing customer entry. Channel letters should identify the correct business without competing with a neighbor or directory.
At a multi-tenant storefront, photograph the whole fascia and adjacent signs. Confirm the business name and whether the property uses a common sign band. A measured proof can keep the logo legible and separate from neighboring marks instead of sizing it from artwork alone.
Where customers arrive by car, include an angled driveway view and likely parking point. If the facade appears only after a turn, discuss whether another approved directional sign is needed. Channel letters identify the business at the building; they do not guide a visitor before it is visible.
Before selecting individual mounting or a raceway, share landlord rules and facade photos. Electrical access and working height also affect planning. Review permits for the exact address and sign scope rather than assuming requirements from municipal boundaries.
Coordinate this sign with Pembroke Park exterior building signs. Share separate dimensions and photos for each location.
Front-Lit, Halo-Lit or Both?
These three lighting styles use different face and back materials. The diagram shows the construction and the effect each one creates. Choose the look you want, then check it against your wall color, available space and landlord’s sign requirements.
Front-lit channel letters
LEDs inside the letter shine through a translucent acrylic face. The face is the bright part you see at night, while the metal sides give the letter its depth. This is a familiar choice for shops, restaurants and showrooms where a name needs to stand out from the road or parking lot.
White acrylic, colored acrylic and translucent vinyl treatments give you different ways to carry your brand colors. Some front-lit letters have a trim cap around the face; the finish and face treatment are part of the approved design.
Reverse-lit or halo-lit letters
These have an opaque face and LEDs that shine toward the wall. Spacing behind the letters lets the light form a halo around the outline. Painted or metal faces remain visible during the day, with a softer glow after dark.
The wall is part of the effect. A smooth, light wall reflects the glow differently from dark brick or textured cladding. The stand-off distance and letter spacing need to work with that surface.
Front and back lit letters
A translucent face and a clear back let the sign light forward and create a halo behind it. You can also combine different lighting treatments within a logo, such as a glowing name with a backlit symbol.
This gives you more control over the nighttime look, but adds lighting and wiring decisions. We show which parts illuminate on the drawing so you can approve the effect before fabrication.
Illuminated office logos
Indoors, a lit logo is usually seen much closer. Letter depth, brightness and the cable route matter beside a reception desk or decorative wall. The same brand can use a smaller interior sign without copying the exterior installation.
For other indoor treatments, compare office lobby signs, edge-lit acrylic signs and custom acrylic signs. LED neon creates a different line of light and is a separate product.
For more lighting examples, see backlit channel letters or our guide to front-lit versus halo-lit signs.
What Color Will the Face Be, Day and Night?
The face is the front surface of a channel letter. It controls the daytime color and how light passes through the sign after dark. The illustrated options below show why the face material deserves its own decision, even when the letter shape stays the same.
Daytime: lights off
Nighttime: LEDs on
White acrylic with colored vinyl
A white translucent acrylic face can carry applied colored vinyl. This gives you a colored face while letting light through it. The original material example shows 3M colored vinyl; the selected film and acrylic should suit an illuminated sign.
Colored acrylic
The color is in the acrylic itself. It can be a good fit when an available acrylic color suits the logo. Check the color both unlit and illuminated, because the glow may look different from a printed brand reference.
Plain white acrylic
A white face gives a clean, bright illuminated letter. It is useful for simple wordmarks and for signs where white lettering provides strong contrast against the building.
Black and white day/night faces
A day/night face is designed to look dark during the day and light up white at night. It gives you an alternative when a black daytime wordmark would otherwise lose its readable face after dark. Ask to see the lit effect alongside the daytime finish.
Printed vinyl on white acrylic
Printed translucent vinyl allows graphics or multiple colors on the face. The original example includes 3M printed vinyl. The print, film and acrylic work together, so we review the illuminated color as well as the daytime artwork.
Bring your brand colors or Pantone references. We help select the closest suitable face and return finishes, with samples or proofs to approve how the sign will look in both conditions.
How Your Channel Letters Are Built
Each letter is a separate three-dimensional body. Aluminum backs and sides, called returns, form the structure. A typical front-lit letter has an acrylic face, LED modules inside and wiring connected to a power supply. With direct mounting, the wall shows through between the letters.
Common construction uses aluminum returns around .040 to .063 inch thick and letter bodies about 3 to 5 inches deep. Depth, face material and the back arrangement can change for a halo-lit or specialty sign. We confirm those details on the drawing for your job.
The LEDs sit inside the letter body, while the face and return finishes carry the brand’s appearance. A clear back can let light reach the wall for a halo effect. Outdoor construction also needs appropriate wiring pass-throughs, sealing and drainage, as shown in the lighting diagram.
From artwork to finished sign
- Approve the design: confirm the wording, logo, size, lighting, colors and mounting position.
- Make the letter bodies: cut the backs and form the returns to the approved shapes.
- Prepare the faces: cut the acrylic or metal and apply the selected face treatment.
- Fit and check the lighting: position the LED modules, route the wiring and test the illuminated effect.
- Prepare for installation: match the letters, mounting hardware and layout template to the agreed installation.
Keep the final drawing and component information with your building records. They make future service and replacement work easier to match to the original sign.
Choose Letter Size for the Distance People Will See It
A sign read from a sidewalk needs a different scale from one seen across a parking lot or from a busy road. Start with the distance between your sign and the people you want to reach. Then check the available sign area and the size the property allows.
Our chart uses about 10 feet of viewing distance for each inch of letter height as a starting point for impact. That puts a 12-inch letter at about 120 feet and a 24-inch letter at about 240 feet. Those are planning examples, not guarantees: thin strokes, decorative lettering, poor contrast and an angled view can make the same letters harder to read.
Send a wide photo from the actual approach. We can review letter height, spacing and logo proportions together. Read more in our channel-letter size guide.
| Letter height | Distance for impact | Maximum readable distance |
|---|---|---|
| 3 inches | About 30 feet | 100 feet |
| 6 inches | About 60 feet | 200 feet |
| 9 inches | About 90 feet | 400 feet |
| 12 inches | About 120 feet | 525 feet |
| 15 inches | About 150 feet | 630 feet |
| 18 inches | About 180 feet | 750 feet |
| 24 inches | About 240 feet | 1,000 feet |
| 30 inches | About 300 feet | 1,250 feet |
| 36 inches | About 360 feet | 1,500 feet |
The chart’s longer maximum distances assume favorable conditions and simple uppercase lettering. For a moving driver, quick recognition matters more than being able to work out the name from the farthest possible point. The International Sign Association’s placement guidance also explains how traffic, letter style and viewing conditions change the size needed.
Direct Mounting, a Raceway or Stand-Offs?
Letters mounted directly to the wall
Individual letters attach to the building, with the wiring route planned behind them. This lets the wall remain visible between the letters and keeps a separate mounting enclosure out of the finished view. The wall material and access behind it affect the installation.
Letters mounted on a raceway
A raceway is an enclosure behind the letters that carries wiring and can house the power supply. It lets the sign mount as an assembly through a planned set of fixing points. Some landlords prefer or require it, especially where they want a consistent sign system for tenants.
The raceway can be finished to suit the wall, but it remains a visible part of the sign. Check the landlord’s criteria before choosing direct mounting or a raceway; one method is not required at every property.
Stand-offs for halo lighting
Reverse-lit letters need a gap behind them so the LEDs can shine onto the wall. Studs and stand-offs set that spacing while securing the letters. The right distance depends on the desired glow, the wall and the approved mounting details.
What the raceway diagram shows
The main building-power connection feeds the power supply. Secondary wires run to the LEDs through planned pass-throughs. Mounting holes and the hanger bar support the assembly, while drainage holes help water leave the enclosure.
The pictured 6-inch by 5-inch enclosure and 2-inch hanger bar are example dimensions. Your installation drawing specifies the raceway size, fixing method and electrical arrangement for your sign.
For a replacement sign, include photos of the old fixing and wiring points and tell us whether removal or wall restoration is needed. Our channel-letter installation guide explains the details to gather.
Why Some LED Signs Are Hard to Install
A clean-looking sign still needs a practical wiring route. Separate letters may need several connection paths; a solid wall, a finished ceiling or another occupied room behind the sign can limit where those wires go. A suitable backer or raceway can help organize the connections, but its power feed and future service access still need a plan.
Thin logo strokes also leave less space for LEDs and wiring. The dimensions in the graphic illustrate one construction; the actual module, letter depth and usable cavity determine what fits. Send photos of both sides of the wall, any ceiling access and the known power location with your artwork.
Read the full guide to LED sign wiring, wall access and installation requirements for the options to review before fabrication.
What an LED Channel Letter Sign Is Built From
Each letter is its own enclosed unit. The return : the letter’s side wall : is formed from aluminum, generally .040 to .063 gauge and 3 to 5 inches deep, giving the letter real structural rigidity rather than a flat decal look. The face is acrylic, cut to your exact brand color and held in place by a trim cap that caps the seam between face and return. Inside, a run of low-voltage LED modules wires back to a UL-listed power supply. Everything is solid-state LED; there’s no tubing, no gas, nothing fragile. For a warehouse or distribution building that might see a sign running unattended for a decade with nobody checking on it daily, that durability is the entire point.
Because each letter stands as its own piece rather than sitting on a shared panel, the building wall shows through between the letters and the whole assembly reads as part of the structure, not something bolted on as an afterthought. That’s why channel letter signs remain the standard pick for warehouse fronts and showroom facades throughout this stretch of Broward.
Front-Lit and Halo-Lit for Different Roads
A business fronting Hallandale Beach Boulevard, where traffic moves fast and there’s competing signage on every block, generally wants front-lit letters : the acrylic face glows evenly and pulls the eye from a distance. A company set back on a quieter industrial street, or one whose building identity matters more to trade customers and delivery drivers who already know where they’re going, sometimes prefers halo-lit (reverse-lit) letters: an opaque face that throws a soft glow onto the wall behind it for a cleaner, more corporate look. Some buildings combine both for a lit face with a halo behind it. We cover the tradeoffs in our guide to the difference between front-lit and backlit channel letters, and our backlit (halo-lit) channel letters page shows real installs of the halo effect.
HVHZ Engineering: Not Optional in Broward County
Pembroke Park sits inside Broward County, which along with Miami-Dade falls under the High-Velocity Hurricane Zone : the toughest wind-load standard in the country for any structure attached to a building, including signs. A channel letter set mounted to a warehouse facade off Pembroke Road has to be engineered and mounted to hold through the kind of wind event that shuts down I-95, and Broward County will require signed and sealed engineering to prove it before a permit is issued. This isn’t paperwork you can skip by ordering a sign online from an out-of-state fabricator. The letter returns, the mounting hardware, and the attachment method all have to be specified to HVHZ wind-load calculations for your exact building and letter size.
Because Pembroke Park is unincorporated in parts and municipally governed in others, sign permitting runs through the Town of Pembroke Park and Broward County, and both plan review and post-installation inspection are part of the process. We handle design, HVHZ engineering, permitting, UL-listed fabrication, and installation entirely in-house : the same shop that draws the letters also stamps the calculations and pulls the permit, so nothing gets lost in a handoff between vendors.
Mounting on Warehouse and Flex-Industrial Buildings
Warehouse and light-industrial facades are a different mounting challenge than a storefront in a strip mall. Tilt-up concrete panels, metal building skins, and CMU block all take fasteners differently, and the wind-load calculation has to account for the actual substrate, not a generic wall assumption. Flush-mounting individual letters directly to a concrete or block facade gives the cleanest read and works well on the big, simple building faces common along the industrial corridors here. Multi-tenant flex buildings, more common near the flea market and along SW 40th Street, often call for a raceway : an aluminum enclosure that carries the letters and conceals the wiring and power supplies behind one controlled set of wall penetrations, which landlords prefer because it keeps the facade easy to restore between tenants. We match the method to your building and lease, and our page on channel letter installation requirements walks through how that decision gets made.
Legible From the Road, Built to Last
A lot of the businesses in Pembroke Park depend on being found by people who aren’t locals : truck drivers making a delivery, wholesale buyers following a GPS pin, flea market vendors and shoppers scanning a commercial strip for the first time. That makes daytime and nighttime legibility a bigger factor here than in a walkable retail district where customers already know the address. In daylight, the acrylic face and painted aluminum return carry your brand color as a solid, clean graphic visible from a moving vehicle. After dark, the LEDs take over, and a well-sized sign reads clearly from a highway on-ramp or a dark industrial street with no other lighting nearby. Getting the letter height right for the actual viewing distance : a sign read from I-95 needs very different proportions than one read from a parking lot : is something we work through before fabrication starts, and our breakdown of the right size for channel letters covers the math.
The LED modules themselves carry roughly a 50,000-hour service life, so a sign running every night can go many years before anyone has to think about it : a real advantage for a distribution or wholesale operation that isn’t going to send someone up on a lift to check bulbs. Low power draw, low heat, and long life are why LED channel letters have become the default choice for durable exterior building signage across Broward’s commercial and industrial corridors, not just its retail strips.
Matching the Sign to Pembroke Park’s Business Mix
There isn’t one dominant look here because there isn’t one dominant business type. Wholesale distributors, import houses, and trade suppliers along Hallandale Beach Boulevard and near I-95 tend to want large, high-contrast front-lit letters that read fast to a driver who’s never been to the building before : legibility over subtlety. Light-manufacturing and service operations on the quieter industrial streets often lean toward a cleaner halo-lit or combination build that signals an established, professional operation to the trade customers and inspectors who visit. Businesses drawing traffic from the flea market crowd benefit from bold, simple letterforms that stand out against a lot of competing signage in a small area.
Plenty of these same companies also want the identity to continue inside : a showroom counter, a trade-desk lobby, or a reception area where wholesale buyers are greeted. For that, non-illuminated metal logo signs and our office lobby signs carry the brand from the parking lot to the counter without needing a second engineering package. Where a lit interior element makes sense, edge-lit LED signs and custom acrylic signs deliver the same lit-brand feel at a smaller, interior scale.
A Small Town Wedged Between Bigger Neighbors
Pembroke Park covers barely two square miles, but it sits right where Hollywood, Pembroke Pines, Dania Beach, and Miramar all meet, and that geography is part of why so many wholesale and distribution operations set up here in the first place. A business on Pembroke Road or SW 40th Street is minutes from the Hollywood city line and just as close to the Pembroke Pines and Miramar business parks, which makes the town a genuine logistics crossroads rather than a bedroom suburb of any one of them. Trucks moving between Dania Beach’s freight yards near the port and the distribution centers further west cut straight through town, and a building sign here has to work for that regional pass-through traffic, not just for local customers who already know the address.
That crossroads position also means local buyers are effectively comparison-shopping against sign shops that only know Hollywood’s permit desk, or only know Miramar’s. We work all four of these Broward cities regularly, along with the rest of the county, so the same HVHZ engineering package and permitting relationships that get a sign approved in Pembroke Park carry over directly if a business later opens a second location in Hollywood, Pembroke Pines, Dania Beach, or Miramar.
Property Approval, Permits and Installation
Confirm the current landlord or property sign criteria before approving the design. They may cover the location, overall size, colors, lighting or mounting method. The applicable permit and engineering requirements depend on the actual address and project.
Titans handles or significantly assists with permitting where required and coordinates survey and engineering needs. Send the written property criteria and the site address so the approval path can be checked. A finished photo is not a substitute for a reviewed mounting plan.
Our business-sign permit guide explains the questions to ask before production. For the local rules, see the Pembroke Park sign permit guide.
Allow time for approvals and site work
Permits add approximately 4 to 8 weeks where required, separate from roughly 3 to 4 weeks or longer for production. Landlord review, engineering, comments and access scheduling can also affect the installation date. Share your opening date early.
A qualified electrician performs electrical work. We coordinate the signage requirements and installation handoff so power location, switching, connection and responsibilities are agreed. Photographs should show the building height, canopy, landscaping, access-equipment space and occupied entrances.
Watch Channel Letters Being Made
See how channel letters take shape in the shop. The fabrication video shows the product behind the finished sign, with a real sign preview before you press play.
When sharing a reference, say what you like about it: the face color, letter depth, lighting effect, mounting or overall proportions. That is more useful than asking for a sign “just like the photo” on a wall with different conditions.
How Much Do Channel Letter Signs Cost?
$2,000 to $5,000 is a useful starting budget for many storefront channel-letter signs. It is not a fixed price: the size and number of letters make a big difference. A longer name needs more letters, and taller letters need more material and lighting. Larger building signs can go above that range.
For a rough letter estimate, you can use $20 to $30 per inch of letter height, per letter. Add the letter heights together, then multiply by that range. Logos, unusual shapes and specialty lighting need their own estimate.
A simple budgeting example
Ten letters, each 12 inches tall, total 120 inches of letter height. At $20 to $30 per inch, that gives an estimated $2,400 to $3,600 for the letter calculation.
The same ten letters at 18 inches total 180 inches, giving $3,600 to $5,400. That is why increasing the height can move a sign beyond an initial $2,000 to $5,000 budget.
These examples help you compare sizes. They are not a complete installed quote. Confirm the logo, lighting, mounting, installation, electrical work, permits and engineering scope before relying on a total.
What else affects the price?
- The length of the business name and the complexity of its logo.
- Front-lit, halo-lit or combined lighting.
- Acrylic face treatments, metal finishes and letter depth.
- Direct mounting, a raceway or a separate backing panel.
- Sign-removal work, wall repairs and access equipment.
- Electrical connection, engineering and permitting needs.
- Quantity, delivery and installation locations.
Production and permit timing
Allow roughly 3 to 4 weeks or longer for production, depending on the approved design, materials and quantity. Permits add another 4 to 8 weeks. We confirm the sequence and installation date for your job so the production estimate is not mistaken for the whole project schedule.
Titans serves Miami-Dade, Broward and Palm Beach and ships signs nationwide. Installation outside South Florida is quoted for the project, with travel or installer coordination as needed.
What to Send for Your Quote
Logo, dimensions and colors
Send the largest available logo file, preferably vector artwork, plus brand colors and approved wording. Include the width and height of the available sign area and a straight-on wall photograph. Tell us the intended viewing distance and whether the sign faces a sidewalk, parking area or road.
Do not use a phone screenshot as the only production reference if a vector master exists. Fine artwork details, outlines and spacing need to remain clear when the sign is fabricated. If the logo needs adaptation, approve that change before production.
The lighting brief
State whether you want a glowing face, a halo, or both. Describe the intended light color and which logo elements should illuminate. Include the wall finish and any existing nighttime lighting near the sign so the proof can be discussed in context.
Address and installation details
Include the exact address, mounting surface, sign height, quantity, target opening date and known property restrictions. Identify who approves the artwork, who provides landlord approval, and who handles the electrical connection.
For a multi-location order, list the measurements and conditions separately for each address. Consistent brand artwork does not make every installation identical. The production specification and logistics should reflect the actual locations.
Review before fabrication
Check spelling, proportions, face and return colors, lighting treatment, dimensions and mounting on the proof. Confirm the current logo version and final approver. Keeping those decisions in one approved drawing reduces ambiguity when the fabrication and installation teams work from it.
Looking After Your Finished Sign
LED channel letters give you an illuminated sign without the glass tubing used in traditional neon. The modules and power supply are selected for the build, and their service needs depend on the components, operating hours and location.
At handover, check the sign in daylight and after dark from the agreed viewing position. Keep the approved drawing, finish references and component information so future maintenance or replacement letters can match the original.
Follow the cleaning advice for the acrylic, vinyl and metal finishes on your sign. Ask about maintenance access and the warranty terms for your build when reviewing the quote.
If a letter or section stops lighting, send photos showing what is affected. The sign-service team and the appropriate qualified trade can review the lighting, connection and access needed for the repair.
Channel Letter Questions
How much do channel letters cost?
Many storefront signs start around $2,000 to $5,000, depending on size and letter count. A rough letter estimate is $20 to $30 per inch of letter height, per letter. Logos, lighting, mounting, installation, electrical work, permits and engineering need to be confirmed in the actual quote.
How long do production and permits take?
Allow roughly 3 to 4 weeks or longer for production, depending on the approved design, materials and quantity. Permits add approximately 4 to 8 weeks where required. Property approval, review comments, engineering and site access can affect the final installation date.
What affects the price of channel letters in Pembroke Park?
Many storefront signs start around $2,000 to $5,000, but that is not a fixed price. A rough estimate uses $20 to $30 per inch of letter height, per letter. Longer names, taller letters, lighting choice, mounting, access, electrical work, permits, and installation affect the final quote. A final quote follows review of the actual facade, approved drawing, and site scope.
How long will a Pembroke Park channel-letter project take?
Allow about 3 to 4 weeks or longer for production after approval. Permits, when required, can add 4 to 8 weeks, and landlord review, engineering, access, and electrical coordination can affect the date. Send the address and opening target so the project sequence can be reviewed. The property review schedule is confirmed separately for each address and project.
Can Titans install channel letters at my Pembroke Park address?
Titans handles local installation across South Florida, with scope confirmed for the project address. Outside the local area, shipping is available nationwide and installation is quoted individually. Send the facade, location, access details, and property criteria. A qualified electrician performs electrical work. The quote states whether delivery, travel, or installer coordination is included. for this specific project and destination.
Do I need a permit for an LED channel letter sign in Pembroke Park?
The sign and mounting need to be reviewed for the actual address, building and current property criteria. Outdoor wind-load, structural and permit requirements must be included where applicable. Send the property guidelines and building photos before production; a finished-sign photo does not establish approval for another location.
Is Pembroke Park in the High-Velocity Hurricane Zone?
The sign and mounting need to be reviewed for the actual address, building and current property criteria. Outdoor wind-load, structural and permit requirements must be included where applicable. Send the property guidelines and building photos before production; a finished-sign photo does not establish approval for another location.
Can channel letters be mounted on a warehouse or metal building facade?
Individual wall mounting, a raceway or a backer panel can each suit different buildings. The property criteria, actual wall construction, wiring path, working height and service access determine the choice. Share a full-frontage photo and measurements so the drawing and quote can show the visible support and site work.
What's the difference between front-lit and halo-lit channel letters for a business here?
Front-lit letters have a glowing acrylic face built for maximum visibility from a fast-moving road like Hallandale Beach Boulevard or I-95. Halo-lit letters use an opaque face that casts a soft glow on the wall behind it, giving a cleaner, more understated look often preferred by trade and B2B operations.
Can I use LED channel letters inside a showroom or trade counter?
Yes. Illuminated lettering can identify a business inside an office, reception area or showroom. Give the interior location its own dimensions, wall photos, power details and viewing distance. Interior attachment, electrical and property requirements still need review; an indoor location is not an automatic exemption from approval requirements.
Get a Quote for Your Channel Letter Sign
Ready to compare options for your building? Send your artwork, measurements, address and target date below. Include photos and any landlord requirements so we can quote the right sign and installation.
More Channel Letter and Building Sign Information
Latest from Titans of Print
Sign ideas, shop updates and useful tips. Follow @titansofprint on Instagram.
What customers say
